SYROFORM S anti-corrosion and anti-adhesion oil
SYROFORM S is a demoulding oil with an active anti-corrosion additive that has been especially developped for the use in the fiber cement industry. SYROFORM S is an exclusivity of Elkuch Group. 20°C
|chemical and physical
|active corrosion protection
|no corrosion protection
|good separate capacity
|separation capacity not defined
|H304, H319 ,WGK1
|H304, H226 , H332, H315, H351, H373, H411, WGK
Oil SYROFORM S
The SYROFORM S drawing oil consists of an anticorrosion additive and is the most suitable oil for the use with one of the automatic oiling systems of the SYRO HB 2000 series. However, it can be easily used with other oil coating systems as well. SYROFORM S is an exclusivity of Elkuch Group and contains no VOCs and complies with the latest EU-directives.
It is recommended that the SYROFORM S oil is applied with the SYRO Oiling System HB2000. In delivery state a smooth coating by spraying, brushing or rolling is guaranteed. E.g. in the fibre cement plates production process the moulds are first cleaned and then passed through the SYRO Oiling System HB2000 where they are coated with sufficient oil by atomizing it against the upper and bottom side of the moulds. The coating quantity is approximately 0.5 g/m2 with V = 1.0 m/s.
SYROFORM S is primarily used for the spray coating:
Health and Safety
SYROFORM S Oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene. Additional health and safety information are available on request.